Home > Philippines > Home theatre soundproofing and acoustics
For projects in Philippines
Home theatre soundproofing and acoustics in Philippines
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is. Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- Containment
- Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
- Low frequency inside
- Corner absorption with depth, before any surface treatment.
- Reflections
- Side wall and ceiling first reflection points at the seating position.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this material is and where it earns its place in Philippines
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is.
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
Work reaching us from Philippines is mostly service and call centre floors, resorts and hotels, offices, condominiums, schools, hospitals.
- An onward leg is normal Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Containment Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for home theatre soundproofing are on the main product page. This page covers what that means for a project in Philippines.
02 / The build-up
What goes where, from the structure in
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Philippines, split units and VRF running at full load year round, with condensers close to occupied rooms.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Philippines, church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Soundproof curtains
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. In Philippines, classrooms are hard and naturally ventilated with very large class sizes and open corridors.
Track with a seal. Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
Architects working in Philippines usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / Local conditions
What decides the build-up in Philippines
- An onward leg is normal
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors
Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Resort work on fixed dates
Island hotel programmes run to an opening. Real dispatch and transit dates matter more than a marginally better price.
- The housing stock
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
04 / Room by room
Where the money goes on a Philippines project
-
Containment
Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency inside
Corner absorption with depth, before any surface treatment. Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Soundproof curtains, Up to 30 dB
-
Reflections
Side wall and ceiling first reflection points at the seating position. PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Soundproof curtains, 30
For a Philippines interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Conditions
What the Philippines climate rules in and rules out
Philippines is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
On a Philippines job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Before you buy
Where this kind of project usually fails
-
Foam on the walls as a soundproofing measure
Small on the drawing, expensive on site, and almost always found after handover.
-
A standard door on a room built to hold bass
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating before the room is sealed
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating it as a generic Philippines job
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
05 / Getting it there
Supply into Philippines, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, Cebu or Batangas, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila or Cebu |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, Cebu or Batangas, then road or inter-island onward. Air freight for samples.
Questions from Philippines projects
What makes home theatre soundproofing and acoustics different in Philippines?
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
Where should the budget go first on a Philippines project?
Containment. Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Low frequency inside. Corner absorption with depth, before any surface treatment.
Do you have an office or installation team in Philippines?
No. We manufacture in India and supply into Philippines. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Philippines site?
ships from: Palwal, Haryana, India, arrives at: Manila, Cebu or Batangas, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Foam on the walls as a soundproofing measure. A standard door on a room built to hold bass.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.