Home > Philippines > Recording studio acoustics and soundproofing
For projects in Philippines
Recording studio acoustics and soundproofing in Philippines
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. A very large content, dubbing and music sector working inside commercial floors with thin partitions.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The material, and what it actually does on a Philippines job
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
A very large content, dubbing and music sector working inside commercial floors with thin partitions.
Work reaching us from Philippines is mostly service and call centre floors, resorts and hotels, offices, condominiums, schools, hospitals.
- An onward leg is normal Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Philippines.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Philippines, split units and VRF running at full load year round, with condensers close to occupied rooms.
Corner loading. Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Philippines, church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Philippines, classrooms are hard and naturally ventilated with very large class sizes and open corridors.
Mixed finish. Plain felt where it is out of eye line, printed or grooved where it is seen.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What the buildings in Philippines do to the specification
- An onward leg is normal
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors
Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Resort work on fixed dates
Island hotel programmes run to an opening. Real dispatch and transit dates matter more than a marginally better price.
- The housing stock
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- The studio and content scene
A very large content, dubbing and music sector working inside commercial floors with thin partitions.
04 / Room by room
What each space in a Philippines project needs
-
Isolation
A measured background level, agreed before anything is bought. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Acoustic foam and BassBloc, 1800 x 900 mm
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Acoustic foam and BassBloc, 20 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Soundproof curtains, Up to 30 dB
-
Early reflections
Controlled at the mix position, and only there. PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- Acoustic panels, ASTM C423
- Soundproof curtains, 30
For a Philippines interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Climate and durability
What the Philippines climate rules in and rules out
Philippines is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Before you buy
Six mistakes that turn into a second fit-out
-
Buying foam to solve an isolation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Treating the room before the shell is isolated
Small on the drawing, expensive on site, and almost always found after handover.
-
Killing the room completely and calling it controlled
A room can be over-treated. Past the target it stops sounding controlled and starts sounding dead, and you paid for that.
-
Treating it as a generic Philippines job
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
05 / Getting it there
What the route into Philippines actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, Cebu or Batangas, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila or Cebu |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, Cebu or Batangas, then road or inter-island onward. Air freight for samples.
Questions from Philippines projects
What makes recording studio acoustics and soundproofing different in Philippines?
A very large content, dubbing and music sector working inside commercial floors with thin partitions. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
Where should the budget go first on a Philippines project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Philippines?
No. We manufacture in India and supply into Philippines. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Philippines site?
ships from: Palwal, Haryana, India, arrives at: Manila, Cebu or Batangas, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.