Home > Philippines > Acoustic foam and BassBloc
Manufactured in India, supplied in Philippines
Acoustic foam and BassBloc in Philippines
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Philippines. Made at our own plant in India and shipped into Manila, Cebu or Batangas, then road or inter-island onward to site.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The product
What this is, and what it changes in a Philippines room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Philippines is mostly service and call centre floors, resorts and hotels, offices, condominiums, schools, hospitals.
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Philippines.
02 / Specification
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Philippines project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / Local conditions
What decides the build-up in Philippines
- An onward leg is normal
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors
Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Resort work on fixed dates
Island hotel programmes run to an opening. Real dispatch and transit dates matter more than a marginally better price.
- The housing stock
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- The studio and content scene
A very large content, dubbing and music sector working inside commercial floors with thin partitions.
If you are specifying for a Philippines project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Durability in Philippines, before acoustics is discussed
Philippines is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Philippines interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Route to site
Getting it to Philippines, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, Cebu or Batangas, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila or Cebu |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, Cebu or Batangas, then road or inter-island onward. Air freight for samples.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Philippines
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Philippines: questions we are actually asked
Is there a Philippines factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Philippines as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Manila, Cebu or Batangas, then road or inter-island onward to site. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Philippines job?
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock. Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time. Those two things move the build-up far more than the panel figure does.
Does Philippines weather shorten the life of this material?
Philippines is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Philippines?
ships from: Palwal, Haryana, India, arrives at: Manila, Cebu or Batangas, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic foam and BassBloc fail to help?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.