Home > Philippines > Cinema and multiplex soundproofing
For projects in Philippines
Cinema and multiplex soundproofing in Philippines
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes. Church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
- Screen to screen
- Independent construction between auditoria, with services broken at the line.
- In room response
- Heavy absorption on side and rear walls so the mix is heard as intended.
- Plant and projection
- Equipment noise into the auditorium, treated at source.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this material is and where it earns its place in Philippines
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes.
Church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
Work reaching us from Philippines is mostly service and call centre floors, resorts and hotels, offices, condominiums, schools, hospitals.
- An onward leg is normal Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Screen to screen Independent construction between auditoria, with services broken at the line.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for cinema soundproofing are on the main product page. This page covers what that means for a project in Philippines.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Philippines, split units and VRF running at full load year round, with condensers close to occupied rooms.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Philippines, church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Philippines, classrooms are hard and naturally ventilated with very large class sizes and open corridors.
On a 25 to 50 mm air gap. The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
If you are specifying for a Philippines project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What decides the build-up in Philippines
- An onward leg is normal
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors
Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Typhoons and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Resort work on fixed dates
Island hotel programmes run to an opening. Real dispatch and transit dates matter more than a marginally better price.
- Assembly and performance rooms
Church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
04 / Room by room
Room by room, on a typical Philippines job
-
Screen to screen
Independent construction between auditoria, with services broken at the line. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Acoustic carpet and rugs, High density polyester
-
In room response
Heavy absorption on side and rear walls so the mix is heard as intended. Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Acoustic carpet and rugs, Felt
-
Plant and projection
Equipment noise into the auditorium, treated at source. PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Acoustic panels, ASTM C423
- Acoustic carpet and rugs, 64 sq ft per pack
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Climate and durability
The Philippines climate decides the material list
Philippines is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Where a consultant is already engaged on a Philippines project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Before you buy
What we watch go wrong on jobs like this
-
A shared service void running across the wall line
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating the auditorium to fix bleed from the next screen
This is the one that comes back as a second fit-out rather than a snag.
-
Doors and lobbies specified late and undersized
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating it as a generic Philippines job
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
05 / Getting it there
What the route into Philippines actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, Cebu or Batangas, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila or Cebu |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, Cebu or Batangas, then road or inter-island onward. Air freight for samples.
Questions from Philippines projects
What makes cinema and multiplex soundproofing different in Philippines?
Church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes. Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
Where should the budget go first on a Philippines project?
Screen to screen. Independent construction between auditoria, with services broken at the line. In room response. Heavy absorption on side and rear walls so the mix is heard as intended.
Do you have an office or installation team in Philippines?
No. We manufacture in India and supply into Philippines. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Philippines site?
ships from: Palwal, Haryana, India, arrives at: Manila, Cebu or Batangas, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
A shared service void running across the wall line. Treating the auditorium to fix bleed from the next screen.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.