Home > Kuala Lumpur > Recording studio acoustics and soundproofing
For projects in Kuala Lumpur
Recording studio acoustics and soundproofing in Kuala Lumpur
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. A growing content and music sector working out of shop lots and commercial floors with thin partitions.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The material, and what it actually does on a Kuala Lumpur job
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
A growing content and music sector working out of shop lots and commercial floors with thin partitions.
Work reaching us from Kuala Lumpur is mostly mixed use developments, condo towers, hotels, offices, restaurants, clinics, studios.
- Everything in one building Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Concrete towers, hard interiors The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- Humidity all year PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Kuala Lumpur.
02 / The build-up
The build-up, layer by layer
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Kuala Lumpur, split units and VRF with condensers on balconies and in air wells, running at full load all year.
Behind a fabric frame. Where the room has to look finished, absorber inside a frame rather than foam on show.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Kuala Lumpur, mosques, temples, churches and function halls are tall hard volumes carrying amplified speech and music.
Resilient bar. Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
-
Layer 3
Soundproof curtains
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. In Kuala Lumpur, classrooms are hard and naturally ventilated with open corridors and large assembly halls.
Full height with return. Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
If you are specifying for a Kuala Lumpur project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
The Kuala Lumpur conditions that change the answer
- Everything in one building
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Concrete towers, hard interiors
The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- Humidity all year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- An hour from the port
Port Klang is close, which keeps the inland cost low and the date predictable.
- The housing stock
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- The studio and content scene
A growing content and music sector working out of shop lots and commercial floors with thin partitions.
04 / Room by room
Space by space, for Kuala Lumpur briefs
-
Isolation
A measured background level, agreed before anything is bought. Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Acoustic foam and BassBloc, 1800 x 900 mm
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- Acoustic foam and BassBloc, 20 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Soundproof curtains, Up to 30 dB
-
Early reflections
Controlled at the mix position, and only there. PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- Acoustic panels, ASTM C423
- Soundproof curtains, 30
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate
Durability in Kuala Lumpur, before acoustics is discussed
Kuala Lumpur is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Straight talk
Where this kind of project usually fails
-
Buying foam to solve an isolation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Treating the room before the shell is isolated
Small on the drawing, expensive on site, and almost always found after handover.
-
Killing the room completely and calling it controlled
We would rather calculate the area and sell you less of it than line every surface and call it thorough.
-
Treating it as a generic Kuala Lumpur job
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
05 / Logistics
How material reaches a Kuala Lumpur site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang, then a short road run into Kuala Lumpur. Air freight for samples and urgent quantities.
Questions from Kuala Lumpur projects
What makes recording studio acoustics and soundproofing different in Kuala Lumpur?
A growing content and music sector working out of shop lots and commercial floors with thin partitions. Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
Where should the budget go first on a Kuala Lumpur project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Kuala Lumpur?
No. We manufacture in India and supply into Kuala Lumpur. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Kuala Lumpur site?
ships from: Palwal, Haryana, India, arrives at: Port Klang, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.