Home > Kuala Lumpur > Soundproofing materials
Manufactured in India, supplied in Kuala Lumpur
Soundproofing materials in Kuala Lumpur
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Kuala Lumpur. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Kuala Lumpur job
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Kuala Lumpur is mostly mixed use developments, condo towers, hotels, offices, restaurants, clinics, studios.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Kuala Lumpur.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / Data sheet
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What decides the build-up in Kuala Lumpur
- Everything in one building
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Concrete towers, hard interiors
The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- Humidity all year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- An hour from the port
Port Klang is close, which keeps the inland cost low and the date predictable.
- Plant and HVAC
Split units and VRF with condensers on balconies and in air wells, running at full load all year.
- The housing stock
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
For a Kuala Lumpur practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
Durability in Kuala Lumpur, before acoustics is discussed
Kuala Lumpur is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
Supply into Kuala Lumpur, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang, then a short road run into Kuala Lumpur. Air freight for samples and urgent quantities.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Kuala Lumpur
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Kuala Lumpur: questions we are actually asked
Are these soundproofing materials made in Kuala Lumpur?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kuala Lumpur as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Kuala Lumpur enquiry?
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure. The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer. Those two things move the build-up far more than the panel figure does.
Does Kuala Lumpur weather shorten the life of this material?
Kuala Lumpur is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Kuala Lumpur?
ships from: Palwal, Haryana, India, arrives at: Port Klang, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do soundproofing materials fail to help?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
How is the order packed and what is the minimum?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.