Home > Kuala Lumpur > Acoustic panels
Manufactured in India, supplied in Kuala Lumpur
Acoustic panels in Kuala Lumpur
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Kuala Lumpur. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Kuala Lumpur brief
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Kuala Lumpur is mostly mixed use developments, condo towers, hotels, offices, restaurants, clinics, studios.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Kuala Lumpur.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Kuala Lumpur project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Kuala Lumpur
- Everything in one building
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Humidity all year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- Concrete towers, hard interiors
The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- An hour from the port
Port Klang is close, which keeps the inland cost low and the date predictable.
- School and campus buildings
Classrooms are hard and naturally ventilated with open corridors and large assembly halls.
- The studio and content scene
A growing content and music sector working out of shop lots and commercial floors with thin partitions.
If you are specifying for a Kuala Lumpur project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
Why the climate in Kuala Lumpur changes the material, not the target
Kuala Lumpur is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
What the route into Kuala Lumpur actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang, then a short road run into Kuala Lumpur. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Kuala Lumpur certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The material in real interiors
Kuala Lumpur: questions we are actually asked
Do you manufacture acoustic panels in Kuala Lumpur?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kuala Lumpur as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Kuala Lumpur project?
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure. The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer. Those two things move the build-up far more than the panel figure does.
Does Kuala Lumpur weather shorten the life of this material?
Kuala Lumpur is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Kuala Lumpur site?
ships from: Palwal, Haryana, India, arrives at: Port Klang, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.