Home > Kuala Lumpur > Wood wool acoustic panels
Manufactured in India, supplied in Kuala Lumpur
Wood wool acoustic panels in Kuala Lumpur
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Kuala Lumpur. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The product
What this material is and where it earns its place in Kuala Lumpur
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Kuala Lumpur is mostly mixed use developments, condo towers, hotels, offices, restaurants, clinics, studios.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Kuala Lumpur.
02 / Specification
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What the buildings in Kuala Lumpur do to the specification
- Humidity all year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a few seasons.
- Everything in one building
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure.
- Concrete towers, hard interiors
The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer.
- An hour from the port
Port Klang is close, which keeps the inland cost low and the date predictable.
- Assembly and performance rooms
Mosques, temples, churches and function halls are tall hard volumes carrying amplified speech and music.
- School and campus buildings
Classrooms are hard and naturally ventilated with open corridors and large assembly halls.
If you are specifying for a Kuala Lumpur project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Durability
The Kuala Lumpur climate decides the material list
Kuala Lumpur is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Kuala Lumpur, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang, then a short road run into Kuala Lumpur. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Kuala Lumpur presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Kuala Lumpur: questions we are actually asked
Do you manufacture wood wool acoustic panels in Kuala Lumpur?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kuala Lumpur as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Klang, about an hour from the city, so the inland leg stays short. You buy at factory prices with one consistent batch across the order.
Why would a Kuala Lumpur build-up differ from anywhere else?
Retail, plant, offices and homes stacked vertically means noise travels between uses that were never meant to share a structure. The frame has mass, so the issue is usually reverberation inside and impact through slabs rather than airborne transfer. Those two things move the build-up far more than the panel figure does.
How does the Kuala Lumpur climate affect this product?
Kuala Lumpur is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Kuala Lumpur site?
ships from: Palwal, Haryana, India, arrives at: Port Klang, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.