Manufactured in India, supplied in Warsaw
Ceiling baffles and clouds in Warsaw
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Warsaw. Made at our own plant in India and shipped into Gdansk, then road to the city, with the inland leg written into the dates we quote.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this material is and where it earns its place in Warsaw
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Warsaw is mostly tower office floors, service centres, residential towers, hotels, schools, clinics.
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Warsaw.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
The Warsaw conditions that change the answer
- New towers, hard surfaces
Glass, raised floors and exposed slabs give sound nowhere to land, so the ceiling plane has to carry the room.
- Floors full of people talking
Service centres and call floors put hundreds of simultaneous conversations in one room. Absorption alone will not deliver privacy there. Ceiling, screens and layout have to work together.
- A very large office pipeline
Warsaw builds office space at a pace few European cities match, which means the same detail repeated across many floors and buildings. Consistency across the order is the whole value.
- Residential towers going up fast
New apartment towers share slabs and walls. Footfall and speech between units is easier to solve on the drawing than after the tenants arrive.
- School and campus buildings
School buildings are hard surfaced with long corridors, and gymnasiums double as assembly halls.
If you are specifying for a Warsaw project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Why the climate in Warsaw changes the material, not the target
Warsaw is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
Getting it to Warsaw, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Gdansk, then road to Warsaw |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Gdansk |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Gdansk, then road to Warsaw. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Warsaw certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Warsaw: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Warsaw?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Warsaw as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Gdansk, then road to the city, with the inland leg written into the dates we quote. You buy at factory prices with one consistent batch across the order.
Why would a Warsaw build-up differ from anywhere else?
Service centres and call floors put hundreds of simultaneous conversations in one room. Absorption alone will not deliver privacy there. Ceiling, screens and layout have to work together. Warsaw builds office space at a pace few European cities match, which means the same detail repeated across many floors and buildings. Consistency across the order is the whole value. Those two things move the build-up far more than the panel figure does.
Will this material last in the Warsaw climate?
Warsaw is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Warsaw?
ships from: Palwal, Haryana, India, arrives at: Gdansk, then road to Warsaw, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do ceiling baffles and clouds fail to help?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.