For projects in Sri Lanka
Auditorium acoustics and soundproofing in Sri Lanka
A large hard volume where speech falls apart long before anyone calls the room echoey. The target is intelligibility at the back row, which is a reverberation and early reflection problem, not a loudspeaker problem. Temples, churches and function halls are hard volumes with long decay carrying amplified speech.
- Reverberation time
- Set against use. Speech and music want different numbers, and a dual use hall needs a decision.
- Early reflections
- Shaped surfaces that send energy to the rear seats rather than absorbing everything.
- Rear wall
- The single worst surface in most halls, and the first one to treat.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The material, and what it actually does on a Sri Lanka job
A large hard volume where speech falls apart long before anyone calls the room echoey. The target is intelligibility at the back row, which is a reverberation and early reflection problem, not a loudspeaker problem.
Temples, churches and function halls are hard volumes with long decay carrying amplified speech.
Work reaching us from Sri Lanka is mostly hotels and resorts, apartments, offices, hospitals, schools, studios.
- A very short sea leg Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
- Hospitality leads the market Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs.
- Humid, coastal, monsoon Our PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Reverberation time Set against use. Speech and music want different numbers, and a dual use hall needs a decision.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for auditorium acoustics are on the main product page. This page covers what that means for a project in Sri Lanka.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Wooden slat acoustic panels
Timber slats on an acoustic backing. In Sri Lanka, split units and generator sets, with condensers close to bedrooms and generators running during outages.
Feature wall only. Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
-
Layer 2
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Sri Lanka, temples, churches and function halls are hard volumes with long decay carrying amplified speech.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Sri Lanka, classrooms are hard and naturally ventilated with large class sizes and open corridors.
Loose lay on tackifier. Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
For a Sri Lanka practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / Local conditions
What the buildings in Sri Lanka do to the specification
- A very short sea leg
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
- Hospitality leads the market
Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs.
- Humid, coastal, monsoon
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Buying direct from the plant
No importer margin between the factory and your site, and the person answering the technical question made the product.
- Assembly and performance rooms
Temples, churches and function halls are hard volumes with long decay carrying amplified speech.
- School and campus buildings
Classrooms are hard and naturally ventilated with large class sizes and open corridors.
04 / Room by room
What each space in a Sri Lanka project needs
-
Reverberation time
Set against use. Speech and music want different numbers, and a dual use hall needs a decision. Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
- Wood wool acoustic panels, 1200 x 600 mm
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Ceiling baffles and clouds, Made to the drawing, standard and custom
-
Early reflections
Shaped surfaces that send energy to the rear seats rather than absorbing everything. Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs.
- Wood wool acoustic panels, 20 mm
- PET felt acoustic panels, 4 to 24 mm
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
-
Rear wall
The single worst surface in most halls, and the first one to treat. Our PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Wood wool acoustic panels, 400 kg per cubic metre
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
- Ceiling baffles and clouds, ASTM C423
For a Sri Lanka interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Durability
The Sri Lanka climate decides the material list
Sri Lanka is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Where a consultant is already engaged on a Sri Lanka project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Straight talk
Where this kind of project usually fails
-
Absorbing the whole room and losing the back rows
This is the one that comes back as a second fit-out rather than a snag.
-
Adding speakers to fix a reverberation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Ignoring the rear wall because it is behind the audience
It sounds like a small detail until the room is finished and the complaint arrives.
-
Treating it as a generic Sri Lanka job
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
05 / Getting it there
How material reaches a Sri Lanka site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Colombo, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Colombo |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Colombo, then a short road run to site. The short transit means even modest consignments move economically. Air freight for samples.
Questions from Sri Lanka projects
What makes auditorium acoustics and soundproofing different in Sri Lanka?
Temples, churches and function halls are hard volumes with long decay carrying amplified speech. Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
Where should the budget go first on a Sri Lanka project?
Reverberation time. Set against use. Speech and music want different numbers, and a dual use hall needs a decision. Early reflections. Shaped surfaces that send energy to the rear seats rather than absorbing everything.
Do you have an office or installation team in Sri Lanka?
No. We manufacture in India and supply into Sri Lanka. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Sri Lanka site?
ships from: Palwal, Haryana, India, arrives at: Colombo, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Absorbing the whole room and losing the back rows. Adding speakers to fix a reverberation problem.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.