Manufactured in India, supplied in Sri Lanka
Ceiling baffles and clouds in Sri Lanka
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Sri Lanka. Made at our own plant in India and shipped into Colombo.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Sri Lanka brief
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Sri Lanka is mostly hotels and resorts, apartments, offices, hospitals, schools, studios.
Concrete and block construction with hard floors, in houses and new apartment towers that share slabs.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Sri Lanka.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
On a Sri Lanka job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What we see driving Sri Lanka briefs
- Humid, coastal, monsoon
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- A very short sea leg
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
- Hospitality leads the market
Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs.
- Buying direct from the plant
No importer margin between the factory and your site, and the person answering the technical question made the product.
- School and campus buildings
Classrooms are hard and naturally ventilated with large class sizes and open corridors.
Architects working in Sri Lanka usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
The Sri Lanka climate decides the material list
Sri Lanka is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Sri Lanka interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
How material reaches a Sri Lanka site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Colombo, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Colombo |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Colombo, then a short road run to site. The short transit means even modest consignments move economically. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Sri Lanka presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Sri Lanka: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Sri Lanka?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Sri Lanka as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Colombo. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Sri Lanka project?
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets. Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs. Those two things move the build-up far more than the panel figure does.
Is this the right material for Sri Lanka conditions?
Sri Lanka is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Sri Lanka site?
ships from: Palwal, Haryana, India, arrives at: Colombo, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are ceiling baffles and clouds the wrong purchase?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.