Manufactured in India, supplied in Sri Lanka
Wood wool acoustic panels in Sri Lanka
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Sri Lanka. Made at our own plant in India and shipped into Colombo.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Sri Lanka
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Sri Lanka is mostly hotels and resorts, apartments, offices, hospitals, schools, studios.
Concrete and block construction with hard floors, in houses and new apartment towers that share slabs.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Sri Lanka.
02 / Specification sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Sri Lanka project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
The Sri Lanka conditions that change the answer
- Humid, coastal, monsoon
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- A very short sea leg
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets.
- Hospitality leads the market
Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs.
- Buying direct from the plant
No importer margin between the factory and your site, and the person answering the technical question made the product.
- Assembly and performance rooms
Temples, churches and function halls are hard volumes with long decay carrying amplified speech.
- School and campus buildings
Classrooms are hard and naturally ventilated with large class sizes and open corridors.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Durability in Sri Lanka, before acoustics is discussed
Sri Lanka is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
How material reaches a Sri Lanka site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Colombo, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Colombo |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Colombo, then a short road run to site. The short transit means even modest consignments move economically. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Sri Lanka presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Sri Lanka: questions we are actually asked
Where are the wood wool acoustic panels you supply to Sri Lanka actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Sri Lanka as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Colombo. You buy at factory prices with one consistent batch across the order.
Why would a Sri Lanka build-up differ from anywhere else?
Western India to Colombo is one of the quickest runs we operate. Small and repeat orders are practical here in a way they are not for distant markets. Resorts and city hotels drive most enquiries. Guest room isolation and function room acoustics are the two recurring briefs. Those two things move the build-up far more than the panel figure does.
Does Sri Lanka weather shorten the life of this material?
Sri Lanka is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Sri Lanka?
ships from: Palwal, Haryana, India, arrives at: Colombo, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.