For projects in Salem
Hospital and healthcare acoustics in Salem
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What this material is and where it earns its place in Salem
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Work reaching us from Salem is mostly steel and textile plant, workshops, offices, canteens, colleges, hospitals.
- Plant noise is a mass problem Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- Hot buildings PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- Intelligibility on the floor Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Salem.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Salem, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Mixed with services. Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Salem, kalyana mandapams, temple halls and auditoria are very large hard volumes carrying amplified speech and music.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Salem, very large school and college campuses in concrete and tile, with auditoria and seminar halls used constantly.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
If you are specifying for a Salem project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / Local conditions
What we see driving Salem briefs
- Plant noise is a mass problem
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- Hot buildings
PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- Intelligibility on the floor
Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- Five days by road
A long run, confirmed before dispatch, with samples sent ahead.
- Plant and HVAC
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
04 / Room by room
Space by space, for Salem briefs
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic panels, ASTM C423
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- PET felt acoustic panels, 4 to 24 mm
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate and durability
Durability in Salem, before acoustics is discussed
Salem is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Before you buy
Six mistakes that turn into a second fit-out
-
Fabric wrapped products in a clinical area
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Absorption used where privacy was the requirement
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Ceiling void left open above a partition
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating it as a generic Salem job
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
05 / Getting it there
Supply into Salem, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five days on a dedicated truck.
Questions from Salem projects
What makes hospital and healthcare acoustics different in Salem?
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs. Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
Where should the budget go first on a Salem project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Salem?
No. We manufacture in India and supply into Salem. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Salem site?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.