Manufactured in India, supplied in Salem
Soundproof curtains in Salem
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Salem. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Salem
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Salem is mostly steel and textile plant, workshops, offices, canteens, colleges, hospitals.
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Salem.
02 / Specification sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Where a consultant is already engaged on a Salem project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What the buildings in Salem do to the specification
- Plant noise is a mass problem
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- Hot buildings
PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- Intelligibility on the floor
Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- Five days by road
A long run, confirmed before dispatch, with samples sent ahead.
- The housing stock
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Architects working in Salem usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
The Salem climate decides the material list
Salem is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Salem interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
Supply into Salem, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five days on a dedicated truck.
5 curtains.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Salem certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Salem: questions we are actually asked
Where are the soundproof curtains you supply to Salem actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Salem as the manufacturer rather than through a dealer. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Salem job?
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them. PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process. Those two things move the build-up far more than the panel figure does.
How does the Salem climate affect this product?
Salem is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Salem?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundproof curtains not do?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
Is there a minimum order, and how does it arrive?
5 curtains. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Salem.