Manufactured in India, supplied in Salem
SoundBlanket mass loaded vinyl in Salem
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Salem. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this is, and what it changes in a Salem room
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Salem is mostly steel and textile plant, workshops, offices, canteens, colleges, hospitals.
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Salem.
02 / Specification sheet
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What we see driving Salem briefs
- Plant noise is a mass problem
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- Hot buildings
PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- Intelligibility on the floor
Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- Five days by road
A long run, confirmed before dispatch, with samples sent ahead.
- The housing stock
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Architects working in Salem usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
Durability in Salem, before acoustics is discussed
Salem is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Salem interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
How material reaches a Salem site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five days on a dedicated truck.
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness.
| 2.5 mm | 10 rolls, 60 sq m, about 315 kg |
|---|---|
| 4 mm | 10 rolls, 60 sq m, about 504 kg |
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Salem presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Salem: questions we are actually asked
Is there a Salem factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Salem as the manufacturer rather than through a dealer. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Salem job?
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them. PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process. Those two things move the build-up far more than the panel figure does.
Is this the right material for Salem conditions?
Salem is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Salem?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundBlanket mass loaded vinyl not do?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Is there a minimum order, and how does it arrive?
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness. 2.5 mm, 10 rolls, 60 sq m, about 315 kg. 4 mm, 10 rolls, 60 sq m, about 504 kg. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.