Home > Port Blair > Wood wool acoustic panels
Manufactured in India, supplied in Port Blair
Wood wool acoustic panels in Port Blair
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Port Blair. Port Blair is reached by ship from the mainland, so the sailing schedule governs the delivery date rather than our dispatch date does.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this material is and where it earns its place in Port Blair
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Port Blair is mostly hotels and guest houses, administrative buildings, hospitals, schools, dining spaces, offices.
RC frame and timber construction with hard floors, in a very humid island climate where moisture resistance decides the material.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Port Blair.
02 / Specification sheet
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
The Port Blair conditions that change the answer
- The sailing sets the date
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
- Get it right the first time
A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships.
- Salt air and heavy monsoon
PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- Seismic islands
Buildings are designed to move, so a build-up must not stiffen across a movement joint.
- Assembly and performance rooms
Community halls, church buildings and resort function rooms are hard volumes carrying amplified speech.
- School and campus buildings
Classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Architects working in Port Blair usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
What the Port Blair climate rules in and rules out
Port Blair is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
Supply into Port Blair, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a ship leg after Chennai |
| Dispatch | 2 to 4 working days |
| To site | a ship leg after Chennai |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal to Chennai or Kolkata, then by ship to the islands. The sailing is scheduled and we plan the whole journey around it.
500 sq ft, about 46 sq m.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Port Blair presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Port Blair: questions we are actually asked
Are these wood wool acoustic panels made in Port Blair?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Port Blair as the manufacturer rather than through a dealer. Port Blair is reached by ship from the mainland, so the sailing schedule governs the delivery date rather than our dispatch date does. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Port Blair enquiry?
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date. A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships. Those two things move the build-up far more than the panel figure does.
Does Port Blair weather shorten the life of this material?
Port Blair is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Port Blair site?
made at: Our own plant, Palwal, Haryana, reaches site in: a ship leg after Chennai, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wood wool acoustic panels not do?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
500 sq ft, about 46 sq m. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.