Home > Port Blair > Wooden slat acoustic panels
Manufactured in India, supplied in Port Blair
Wooden slat acoustic panels in Port Blair
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Port Blair. Port Blair is reached by ship from the mainland, so the sailing schedule governs the delivery date rather than our dispatch date does.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Port Blair
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Port Blair is mostly hotels and guest houses, administrative buildings, hospitals, schools, dining spaces, offices.
RC frame and timber construction with hard floors, in a very humid island climate where moisture resistance decides the material.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Port Blair.
02 / The numbers
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Where a consultant is already engaged on a Port Blair project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What we see driving Port Blair briefs
- The sailing sets the date
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
- Get it right the first time
A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships.
- Salt air and heavy monsoon
PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- Seismic islands
Buildings are designed to move, so a build-up must not stiffen across a movement joint.
- Assembly and performance rooms
Community halls, church buildings and resort function rooms are hard volumes carrying amplified speech.
If you are specifying for a Port Blair project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
What the Port Blair climate rules in and rules out
Port Blair is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Getting it to Port Blair, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a ship leg after Chennai |
| Dispatch | 2 to 4 working days |
| To site | a ship leg after Chennai |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal to Chennai or Kolkata, then by ship to the islands. The sailing is scheduled and we plan the whole journey around it.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Port Blair
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Port Blair: questions we are actually asked
Is there a Port Blair factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Port Blair as the manufacturer rather than through a dealer. Port Blair is reached by ship from the mainland, so the sailing schedule governs the delivery date rather than our dispatch date does. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Port Blair job?
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date. A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships. Those two things move the build-up far more than the panel figure does.
Will this material last in the Port Blair climate?
Port Blair is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Port Blair site?
made at: Our own plant, Palwal, Haryana, reaches site in: a ship leg after Chennai, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wooden slat acoustic panels not do?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.