Home > Port Blair > HVAC, plant and machine noise control
For projects in Port Blair
HVAC, plant and machine noise control in Port Blair
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space. Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
- At source
- Enclosure, barrier or anti vibration mounts at the machine.
- In the path
- Duct lining, attenuators and lagging on the first run out of the plant.
- At the receiver
- Only after the first two, and only for what is left.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Port Blair job
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space.
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Work reaching us from Port Blair is mostly hotels and guest houses, administrative buildings, hospitals, schools, dining spaces, offices.
- The sailing sets the date Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
- Get it right the first time A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships.
- Salt air and heavy monsoon PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- At source Enclosure, barrier or anti vibration mounts at the machine.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for HVAC and plant noise control are on the main product page. This page covers what that means for a project in Port Blair.
02 / The build-up
The build-up, layer by layer
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Port Blair, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Wood wool acoustic panels
Wood fibre bound into a rigid board with an open texture. In Port Blair, community halls, church buildings and resort function rooms are hard volumes carrying amplified speech.
On a cavity. Mounted on battens with an air gap, which is where the low mid performance comes from.
-
Layer 3
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Port Blair, classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Corner loading. Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What decides the build-up in Port Blair
- The sailing sets the date
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
- Get it right the first time
A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships.
- Salt air and heavy monsoon
PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- Seismic islands
Buildings are designed to move, so a build-up must not stiffen across a movement joint.
- Plant and HVAC
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
04 / Room by room
What each space in a Port Blair project needs
-
At source
Enclosure, barrier or anti vibration mounts at the machine. Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Wood wool acoustic panels, 400 kg per cubic metre
-
In the path
Duct lining, attenuators and lagging on the first run out of the plant. A replacement means waiting for the next sailing. We confirm the specification and send samples before anything ships.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Wood wool acoustic panels, 0.30
-
At the receiver
Only after the first two, and only for what is left. PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Wood wool acoustic panels, ASTM C-423 and EN ISO 354
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Durability
Why the climate in Port Blair changes the material, not the target
Port Blair is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Where a consultant is already engaged on a Port Blair project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Straight talk
Where this kind of project usually fails
-
Absorption on the office wall for a plant room problem
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Lagging a duct that is carrying the noise as breakout from the fan
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Ignoring structure borne vibration through the mounts
Small on the drawing, expensive on site, and almost always found after handover.
-
Treating it as a generic Port Blair job
Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
05 / Logistics
Getting it to Port Blair, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a ship leg after Chennai |
| Dispatch | 2 to 4 working days |
| To site | a ship leg after Chennai |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal to Chennai or Kolkata, then by ship to the islands. The sailing is scheduled and we plan the whole journey around it.
Questions from Port Blair projects
What makes HVAC, plant and machine noise control different in Port Blair?
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs. Scheduled vessels, not our dispatch, determine arrival. We work backwards from the sailing and tell you the real date.
Where should the budget go first on a Port Blair project?
At source. Enclosure, barrier or anti vibration mounts at the machine. In the path. Duct lining, attenuators and lagging on the first run out of the plant.
Do you have an office or installation team in Port Blair?
No. We manufacture in India and supply into Port Blair. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Port Blair site?
made at: Our own plant, Palwal, Haryana, reaches site in: a ship leg after Chennai, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Absorption on the office wall for a plant room problem. Lagging a duct that is carrying the noise as breakout from the fan.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.