Manufactured in India, supplied in Peru
Wood wool acoustic panels in Peru
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Peru. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Peru brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Peru is mostly offices, apartments, mining and industrial facilities, hotels, hospitals, schools.
Concrete and block construction with hard floors, in buildings that sit close together and share walls.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Peru.
02 / Data sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Peru project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What we see driving Peru briefs
- Dry coastal climate
Lima is dry and mild. Material stability is straightforward, and PET felt does not degrade or shed in these conditions.
- Callao is next to the market
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately.
- Mining plant and control rooms
Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption.
- Concrete construction
Walls carry mass, so hard live interiors and services noise are the usual complaints rather than transmission between rooms.
- Assembly and performance rooms
Church buildings and event halls are hard volumes carrying amplified speech and music.
- School and campus buildings
Classrooms are concrete and tile with large class sizes and open courtyards that carry sound.
If you are specifying for a Peru project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
The Peru climate decides the material list
Peru is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Peru, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Callao, next to Lima, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Callao |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Callao, then a short road run for Lima work or a longer inland leg for mining sites. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Peru presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Peru: questions we are actually asked
Do you manufacture wood wool acoustic panels in Peru?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Peru as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short. You buy at factory prices with one consistent batch across the order.
Why would a Peru build-up differ from anywhere else?
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately. Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption. Those two things move the build-up far more than the panel figure does.
Will this material last in the Peru climate?
Peru is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Peru?
ships from: Palwal, Haryana, India, arrives at: Callao, next to Lima, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will wood wool acoustic panels not do?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.