Manufactured in India, supplied in Peru
Wooden slat acoustic panels in Peru
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Peru. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
The product, described honestly, for a Peru brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Peru is mostly offices, apartments, mining and industrial facilities, hotels, hospitals, schools.
Concrete and block construction with hard floors, in buildings that sit close together and share walls.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Peru.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Peru job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Peru
- Callao is next to the market
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately.
- Mining plant and control rooms
Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption.
- Dry coastal climate
Lima is dry and mild. Material stability is straightforward, and PET felt does not degrade or shed in these conditions.
- Concrete construction
Walls carry mass, so hard live interiors and services noise are the usual complaints rather than transmission between rooms.
- Assembly and performance rooms
Church buildings and event halls are hard volumes carrying amplified speech and music.
If you are specifying for a Peru project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
What the Peru climate rules in and rules out
Peru is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
For a Peru interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
How material reaches a Peru site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Callao, next to Lima, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Callao |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Callao, then a short road run for Lima work or a longer inland leg for mining sites. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Peru presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Peru: questions we are actually asked
Are these wooden slat acoustic panels made in Peru?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Peru as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Peru enquiry?
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately. Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption. Those two things move the build-up far more than the panel figure does.
Does Peru weather shorten the life of this material?
Peru is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Peru site?
ships from: Palwal, Haryana, India, arrives at: Callao, next to Lima, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are wooden slat acoustic panels the wrong purchase?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.