Manufactured in India, supplied in Peru
PET felt acoustic panels in Peru
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Peru. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Peru job
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Peru is mostly offices, apartments, mining and industrial facilities, hotels, hospitals, schools.
Concrete and block construction with hard floors, in buildings that sit close together and share walls.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Peru.
02 / Specification sheet
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
On a Peru job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What decides the build-up in Peru
- Dry coastal climate
Lima is dry and mild. Material stability is straightforward, and PET felt does not degrade or shed in these conditions.
- Callao is next to the market
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately.
- Mining plant and control rooms
Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption.
- Concrete construction
Walls carry mass, so hard live interiors and services noise are the usual complaints rather than transmission between rooms.
- School and campus buildings
Classrooms are concrete and tile with large class sizes and open courtyards that carry sound.
For a Peru practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
Why the climate in Peru changes the material, not the target
Peru is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
How material reaches a Peru site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Callao, next to Lima, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Callao |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Callao, then a short road run for Lima work or a longer inland leg for mining sites. Air freight for samples.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Peru
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Peru: questions we are actually asked
Do you manufacture PET felt acoustic panels in Peru?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Peru as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Callao, which sits next to Lima, so the road leg for most commercial work is short. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Peru project?
The port sits beside Lima, so most commercial deliveries have almost no inland leg. Mining sites inland are a different calculation and we quote them separately. Continuous machinery and rooms where operators listen for alarms. Enclosure and a low background, not decorative absorption. Those two things move the build-up far more than the panel figure does.
Does Peru weather shorten the life of this material?
Peru is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Peru site?
ships from: Palwal, Haryana, India, arrives at: Callao, next to Lima, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will PET felt acoustic panels not do?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.