Manufactured in India, supplied in Paris
Wooden slat acoustic panels in Paris
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Paris. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Paris room
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Paris is mostly haussmann apartments, offices, studios, restaurants, hotels, clinics.
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Paris.
02 / The numbers
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What we see driving Paris briefs
- Parquet over timber joists
Footfall and chair scrape travel straight down. A resilient layer under the finish does more than anything applied to the ceiling below.
- Thin partitions in divided apartments
Walls built to split one flat into two were never designed to hold speech. Mass and an independent lining are the honest answer.
- Courtyards that amplify
A Paris courtyard reflects plant noise and voices between every window on the block. Treat the source or the surface, not the middle.
- Small rooms
Depth is expensive when a room is 12 square metres. Slim, dense layers beat thick absorbers you cannot afford to lose space to.
- Assembly and performance rooms
Churches, salles des fetes and civic auditoriums are stone and plaster volumes with very long decay.
If you are specifying for a Paris project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
Why the climate in Paris changes the material, not the target
Paris is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Paris interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Getting it to Paris, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Le Havre, Antwerp or Rotterdam |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Le Havre |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before the order, not after.
Sea freight into Le Havre, Antwerp or Rotterdam, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Paris
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Paris: questions we are actually asked
Is there a Paris factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Paris as the manufacturer rather than through a dealer. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Paris job?
Footfall and chair scrape travel straight down. A resilient layer under the finish does more than anything applied to the ceiling below. Walls built to split one flat into two were never designed to hold speech. Mass and an independent lining are the honest answer. Those two things move the build-up far more than the panel figure does.
Will this material last in the Paris climate?
Paris is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Paris?
ships from: Palwal, Haryana, India, arrives at: Le Havre, Antwerp or Rotterdam, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before the order, not after.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.