Manufactured in India, supplied in Paris
Ceiling baffles and clouds in Paris
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Paris. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The product
What you are buying, and what it fixes in Paris
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Paris is mostly haussmann apartments, offices, studios, restaurants, hotels, clinics.
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Paris.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Paris briefs
- Parquet over timber joists
Footfall and chair scrape travel straight down. A resilient layer under the finish does more than anything applied to the ceiling below.
- Thin partitions in divided apartments
Walls built to split one flat into two were never designed to hold speech. Mass and an independent lining are the honest answer.
- Courtyards that amplify
A Paris courtyard reflects plant noise and voices between every window on the block. Treat the source or the surface, not the middle.
- Small rooms
Depth is expensive when a room is 12 square metres. Slim, dense layers beat thick absorbers you cannot afford to lose space to.
- School and campus buildings
School buildings are hard surfaced with high ceilings, and canteens are consistently the loudest rooms.
Architects working in Paris usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
Why the climate in Paris changes the material, not the target
Paris is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Paris actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Le Havre, Antwerp or Rotterdam |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Le Havre |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before the order, not after.
Sea freight into Le Havre, Antwerp or Rotterdam, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Paris presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Paris: questions we are actually asked
Are these ceiling baffles and clouds made in Paris?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Paris as the manufacturer rather than through a dealer. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Paris enquiry?
Footfall and chair scrape travel straight down. A resilient layer under the finish does more than anything applied to the ceiling below. Walls built to split one flat into two were never designed to hold speech. Mass and an independent lining are the honest answer. Those two things move the build-up far more than the panel figure does.
Will this material last in the Paris climate?
Paris is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Paris?
ships from: Palwal, Haryana, India, arrives at: Le Havre, Antwerp or Rotterdam, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before the order, not after.
What should you not buy ceiling baffles and clouds for?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.