Manufactured in India, supplied in New York
Wood wool acoustic panels in New York
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into New York. Made at our own plant in India and shipped into the Port of New York and New Jersey, so the container lands at the city rather than crossing the country.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The material, and what it actually does on a New York job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from New York is mostly pre-war apartments, brownstones, offices, studios, restaurants, clinics, schools.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in New York.
02 / Specification sheet
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What decides the build-up in New York
- Boards decide the build-up
Co-op and condo rules on floor coverings and separating construction usually set the requirement before any acoustic target does. Get the rule first, then design to it.
- Pre-war buildings, timber floors
Older stock passes footfall straight down through the joists. A resilient layer under the finish does more than anything applied to the ceiling below.
- Depth is expensive here
Floor area costs enough that a wall growing a hundred millimetres into the room is a real number. Thin and effective beats thick and theoretical.
- Subway and street
Ground level and underground rail put low frequency into the structure. Panels on a wall will not touch it and we will say so.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
For a New York practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
Why the climate in New York changes the material, not the target
New York is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
Supply into New York, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of New York and New Jersey, then a short road run |
| Dispatch | 4 to 7 working days |
| Freight | Sea into New York |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into the Port of New York and New Jersey, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a New York presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
New York: questions we are actually asked
Are these wood wool acoustic panels made in New York?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into New York as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into the Port of New York and New Jersey, so the container lands at the city rather than crossing the country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a New York enquiry?
Co-op and condo rules on floor coverings and separating construction usually set the requirement before any acoustic target does. Get the rule first, then design to it. Older stock passes footfall straight down through the joists. A resilient layer under the finish does more than anything applied to the ceiling below. Those two things move the build-up far more than the panel figure does.
How does the New York climate affect this product?
New York is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
When would material land on a New York site?
ships from: Palwal, Haryana, India, arrives at: Port of New York and New Jersey, then a short road run, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.