For projects in Montreal
Venue and restaurant acoustics in Montreal
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Montreal brief
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
Work reaching us from Montreal is mostly plex and condo housing, studios and rehearsal rooms, offices, restaurants, schools, clinics.
- Plex floors pass everything Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
- A city that makes a lot of noise on purpose Rehearsal rooms, studios and practice spaces in residential buildings are normal here. Isolation is what keeps them viable, not absorption.
- The port is in the city Containers come up the St Lawrence and land in Montreal itself, which keeps the road leg short and the landed cost predictable.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Montreal.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Montreal, forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
Wall, decoupled. Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Montreal, community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Montreal, school buildings run hard floors and lay-in tile with long heating seasons and sealed envelopes, so rooms stay live and mechanical noise is always present.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
If you are specifying for a Montreal project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / Local conditions
What decides the build-up in Montreal
- Plex floors pass everything
Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
- A city that makes a lot of noise on purpose
Rehearsal rooms, studios and practice spaces in residential buildings are normal here. Isolation is what keeps them viable, not absorption.
- The port is in the city
Containers come up the St Lawrence and land in Montreal itself, which keeps the road leg short and the landed cost predictable.
- Long sealed winters
Buildings close up for months and mechanical systems run hard. Noise stops escaping and accumulates inside instead.
- Assembly and performance rooms
Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
04 / Room by room
What each space in a Montreal project needs
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Wooden slat acoustic panels, 13-3, 14-2, 28-4 and 59-5
- Acoustic carpet and rugs, High density polyester
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. Rehearsal rooms, studios and practice spaces in residential buildings are normal here. Isolation is what keeps them viable, not absorption.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
- Acoustic carpet and rugs, Felt
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Containers come up the St Lawrence and land in Montreal itself, which keeps the road leg short and the landed cost predictable.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Wooden slat acoustic panels, 14, 16 and 18 mm
- Acoustic carpet and rugs, 64 sq ft per pack
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Conditions
What the Montreal climate rules in and rules out
Montreal is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Straight talk
Where this kind of project usually fails
-
Panels on the wall as a neighbour noise solution
Small on the drawing, expensive on site, and almost always found after handover.
-
A lobby with both doors able to open at once
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Extract ducting that bypasses every wall you built
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Treating it as a generic Montreal job
Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
05 / Supply
What the route into Montreal actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Montreal, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Port of Montreal |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into the Port of Montreal, then a short road run to site. Air freight for samples and urgent quantities.
Questions from Montreal projects
What makes venue and restaurant acoustics different in Montreal?
Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume. Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
Where should the budget go first on a Montreal project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Montreal?
No. We manufacture in India and supply into Montreal. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Montreal site?
ships from: Palwal, Haryana, India, arrives at: Port of Montreal, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.