Manufactured in India, supplied in Montreal
Acoustic panels in Montreal
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Montreal. Made at our own plant in India and shipped up the St Lawrence into the Port of Montreal, which puts the container inside the city rather than a province away.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a Montreal job
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Montreal is mostly plex and condo housing, studios and rehearsal rooms, offices, restaurants, schools, clinics.
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Montreal.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Montreal job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Montreal
- Plex floors pass everything
Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it.
- A city that makes a lot of noise on purpose
Rehearsal rooms, studios and practice spaces in residential buildings are normal here. Isolation is what keeps them viable, not absorption.
- The port is in the city
Containers come up the St Lawrence and land in Montreal itself, which keeps the road leg short and the landed cost predictable.
- Long sealed winters
Buildings close up for months and mechanical systems run hard. Noise stops escaping and accumulates inside instead.
- School and campus buildings
School buildings run hard floors and lay-in tile with long heating seasons and sealed envelopes, so rooms stay live and mechanical noise is always present.
- The studio and content scene
Basement and garage studios are common, and a finished basement ceiling with no decoupling passes everything to the floor above.
For a Montreal practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
Durability in Montreal, before acoustics is discussed
Montreal is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Montreal interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
Supply into Montreal, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Montreal, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Port of Montreal |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into the Port of Montreal, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Montreal presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
In finished rooms
Montreal: questions we are actually asked
Do you manufacture acoustic panels in Montreal?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Montreal as the manufacturer rather than through a dealer. Made at our own plant in India and shipped up the St Lawrence into the Port of Montreal, which puts the container inside the city rather than a province away. You buy at factory prices with one consistent batch across the order.
Why would a Montreal build-up differ from anywhere else?
Stacked flats with timber joists send footfall and speech straight down. A resilient layer under the new floor does more than any ceiling treatment below it. Rehearsal rooms, studios and practice spaces in residential buildings are normal here. Isolation is what keeps them viable, not absorption. Those two things move the build-up far more than the panel figure does.
How does the Montreal climate affect this product?
Montreal is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Montreal site?
ships from: Palwal, Haryana, India, arrives at: Port of Montreal, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.