Home > Montenegro > Ceiling baffles and clouds
Manufactured in India, supplied in Montenegro
Ceiling baffles and clouds in Montenegro
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Montenegro. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Montenegro job
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Montenegro is mostly coastal hotels and marinas, restaurants, apartments, offices, schools, clinics.
Stone and concrete construction with hard floors, and coastal resort stock with tile throughout.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Montenegro.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Montenegro do to the specification
- Sea air and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons.
- Stone and hard interiors
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work.
- Season openings are fixed
Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price.
- A short road leg
Bar is close to the whole coast, so the inland cost is low and the landed price is predictable.
- School and campus buildings
School buildings are hard surfaced with high ceilings and halls carrying assembly and sport.
For a Montenegro practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
Why the climate in Montenegro changes the material, not the target
Montenegro is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Montenegro actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Bar, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Bar |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Bar, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Montenegro presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Montenegro: questions we are actually asked
Are these ceiling baffles and clouds made in Montenegro?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Montenegro as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Montenegro enquiry?
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work. Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price. Those two things move the build-up far more than the panel figure does.
How does the Montenegro climate affect this product?
Montenegro is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How does an order actually travel to Montenegro?
ships from: Palwal, Haryana, India, arrives at: Bar, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy ceiling baffles and clouds for?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.