Home > Montenegro > Acoustic carpet and rugs
Manufactured in India, supplied in Montenegro
Acoustic carpet and rugs in Montenegro
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Montenegro. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The product
What this material is and where it earns its place in Montenegro
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Montenegro is mostly coastal hotels and marinas, restaurants, apartments, offices, schools, clinics.
Stone and concrete construction with hard floors, and coastal resort stock with tile throughout.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Montenegro.
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Montenegro
- Sea air and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons.
- Stone and hard interiors
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work.
- Season openings are fixed
Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price.
- A short road leg
Bar is close to the whole coast, so the inland cost is low and the landed price is predictable.
- Assembly and performance rooms
Church buildings, hotel function rooms and civic halls are stone volumes with long decay.
- The housing stock
Stone and concrete construction with hard floors, and coastal resort stock with tile throughout.
If you are specifying for a Montenegro project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Montenegro climate rules in and rules out
Montenegro is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Supply into Montenegro, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Bar, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Bar |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Bar, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Montenegro
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Montenegro: questions we are actually asked
Is there a Montenegro factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Montenegro as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Montenegro project?
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work. Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price. Those two things move the build-up far more than the panel figure does.
Will this material last in the Montenegro climate?
Montenegro is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How quickly can material reach a site in Montenegro?
ships from: Palwal, Haryana, India, arrives at: Bar, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.