Home > Montenegro > Acoustic panels
Manufactured in India, supplied in Montenegro
Acoustic panels in Montenegro
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Montenegro. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Montenegro job
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Montenegro is mostly coastal hotels and marinas, restaurants, apartments, offices, schools, clinics.
Stone and concrete construction with hard floors, and coastal resort stock with tile throughout.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Montenegro.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Montenegro job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Montenegro briefs
- Sea air and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons.
- Stone and hard interiors
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work.
- Season openings are fixed
Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price.
- A short road leg
Bar is close to the whole coast, so the inland cost is low and the landed price is predictable.
- School and campus buildings
School buildings are hard surfaced with high ceilings and halls carrying assembly and sport.
- The studio and content scene
Very limited local studio work, with most demand coming from hospitality and event spaces.
If you are specifying for a Montenegro project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Durability in Montenegro, before acoustics is discussed
Montenegro is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Montenegro, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Bar, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Bar |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Bar, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Montenegro
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Montenegro: questions we are actually asked
Do you manufacture acoustic panels in Montenegro?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Montenegro as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Bar on the Adriatic, then a short road run to almost anywhere on the coast. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Montenegro job?
Local stone and tile in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work. Coastal work has to finish before the season. Real dispatch and transit dates matter more than a marginally better price. Those two things move the build-up far more than the panel figure does.
Does Montenegro weather shorten the life of this material?
Montenegro is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
When would material land on a Montenegro site?
ships from: Palwal, Haryana, India, arrives at: Bar, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic panels for?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.