For projects in Manesar
Hospital and healthcare acoustics in Manesar
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What this material is and where it earns its place in Manesar
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
Work reaching us from Manesar is mostly automotive and component plants, QC and test rooms, corporate offices, training rooms, canteens.
- Continuous machinery Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.
- Test and measurement rooms NVH and QC rooms need a low background before any measurement means anything. That is isolation work with a written target.
- An hour from the plant Short road run, so samples arrive next day and full loads are cheap to move.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Manesar.
02 / The build-up
What goes where, from the structure in
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Manesar, dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Manesar, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Loose lay on tackifier. Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Manesar, classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
Architects working in Manesar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What decides the build-up in Manesar
- Continuous machinery
Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.
- Test and measurement rooms
NVH and QC rooms need a low background before any measurement means anything. That is isolation work with a written target.
- An hour from the plant
Short road run, so samples arrive next day and full loads are cheap to move.
- Training and briefing rooms
Rooms where instructions have to be understood over plant noise need intelligibility, not just less echo.
- Plant and HVAC
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
04 / Room by room
Space by space, for Manesar briefs
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Acoustic carpet and rugs, 4 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. NVH and QC rooms need a low background before any measurement means anything. That is isolation work with a written target.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Short road run, so samples arrive next day and full loads are cheap to move.
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate and durability
Durability in Manesar, before acoustics is discussed
Manesar is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
Where a consultant is already engaged on a Manesar project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Straight talk
What we watch go wrong on jobs like this
-
Fabric wrapped products in a clinical area
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Absorption used where privacy was the requirement
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Ceiling void left open above a partition
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating it as a generic Manesar job
Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.
05 / Supply
Getting it to Manesar, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a day |
| Dispatch | 2 to 4 working days |
| To site | a day |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day or next day by road from Palwal. Small consignments go on a shared vehicle, full loads on a dedicated truck.
Questions from Manesar projects
What makes hospital and healthcare acoustics different in Manesar?
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens. Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.
Where should the budget go first on a Manesar project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Manesar?
No. We manufacture in India and supply into Manesar. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Manesar site?
made at: Our own plant, Palwal, Haryana, reaches site in: a day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.