Home > Manesar > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Manesar

Acoustic carpet and rugs in Manesar

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Manesar. Manesar is an hour from our plant.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.

01 / Start here

What you are buying, and what it fixes in Manesar

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Manesar is mostly automotive and component plants, QC and test rooms, corporate offices, training rooms, canteens.

Builder floors and RC frame apartments with tile and stone floors, often built floor by floor for separate households.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Manesar.

Acoustic carpets and rugs

02 / The numbers

Published specification, identical wherever we ship it

Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.

03 / On the ground

What we see driving Manesar briefs

  • Continuous machinery

    Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall.

  • Test and measurement rooms

    NVH and QC rooms need a low background before any measurement means anything. That is isolation work with a written target.

  • An hour from the plant

    Short road run, so samples arrive next day and full loads are cheap to move.

  • Training and briefing rooms

    Rooms where instructions have to be understood over plant noise need intelligibility, not just less echo.

  • Assembly and performance rooms

    Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.

  • The housing stock

    Builder floors and RC frame apartments with tile and stone floors, often built floor by floor for separate households.

For a Manesar practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.

04 / Conditions

The Manesar climate decides the material list

Manesar is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.

PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.

The risk we design against here is wet-season humidity behind linings.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Getting it there

What the route into Manesar actually looks like

Supply into Manesar
Made atOur own plant, Palwal, Haryana
Reaches site ina day
Dispatch2 to 4 working days
To sitea day
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

Same day or next day by road from Palwal. Small consignments go on a shared vehicle, full loads on a dedicated truck.

320 sq ft for carpet tiles, 500 sq ft for rugs.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m, 5 packs
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Before you buy

Where this goes wrong, said plainly

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Coverage bought instead of a target

    Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.

  • Suppliers who imply a Manesar presence

    Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.

FAQ

Manesar: questions we are actually asked

Where are the acoustic carpet and rugs you supply to Manesar actually made?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Manesar as the manufacturer rather than through a dealer. Manesar is an hour from our plant. You buy at factory prices with one consistent batch across the order.

What changes the specification on a Manesar job?

Presses, robots and conveyors run all shift. The fix is enclosure and barrier at the source, not absorption at the far wall. NVH and QC rooms need a low background before any measurement means anything. That is isolation work with a written target. Those two things move the build-up far more than the panel figure does.

Is this the right material for Manesar conditions?

Manesar is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.

What is the delivery time into Manesar?

made at: Our own plant, Palwal, Haryana, reaches site in: a day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

What should you not buy acoustic carpet and rugs for?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Is there a minimum order, and how does it arrive?

320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.