Home > Manchester > Wood wool acoustic panels
Manufactured in India, supplied in Manchester
Wood wool acoustic panels in Manchester
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Manchester. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Manchester brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Manchester is mostly warehouse conversions, student housing, studios, bars, offices, schools.
Terraced housing with single brick party walls and timber upper floors, much of it converted into flats. Neighbours on both sides is the default.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Manchester.
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Manchester
- Warehouse conversions
Exposed brick, timber joists and steel look superb and hold nothing back. Neighbour noise between units is the first complaint, echo the second.
- Student and build to rent blocks
Repeat rooms mean a repeatable detail. Get the wall and floor build-up right once and it works across every level.
- Metrolink and city centre traffic
Ground level trams and buses put low frequency into the structure, which panels on the wall will not touch.
- Wet climate
PET felt does not take up moisture or feed mould, which suits older brick stock and cold external walls.
- Assembly and performance rooms
Church buildings, civic halls and converted industrial spaces are long-decay volumes with hard surfaces throughout.
- School and campus buildings
School buildings run hard floors and long corridors, with sports halls and dining halls the loudest rooms.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
Why the climate in Manchester changes the material, not the target
Manchester is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
How material reaches a Manchester site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Liverpool, Felixstowe or Southampton |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Liverpool |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we tell you before you order.
Sea freight into Liverpool, Felixstowe or Southampton. Air freight for samples and urgent quantities. Clearance through your agent or ours.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Manchester certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Manchester: questions we are actually asked
Are these wood wool acoustic panels made in Manchester?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Manchester as the manufacturer rather than through a dealer. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Manchester project?
Exposed brick, timber joists and steel look superb and hold nothing back. Neighbour noise between units is the first complaint, echo the second. Repeat rooms mean a repeatable detail. Get the wall and floor build-up right once and it works across every level. Those two things move the build-up far more than the panel figure does.
Does Manchester weather shorten the life of this material?
Manchester is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Manchester?
ships from: Palwal, Haryana, India, arrives at: Liverpool, Felixstowe or Southampton, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we tell you before you order.
Where do wood wool acoustic panels fail to help?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.