Home > Manchester > Wooden slat acoustic panels
Manufactured in India, supplied in Manchester
Wooden slat acoustic panels in Manchester
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Manchester. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What you are buying, and what it fixes in Manchester
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Manchester is mostly warehouse conversions, student housing, studios, bars, offices, schools.
Terraced housing with single brick party walls and timber upper floors, much of it converted into flats. Neighbours on both sides is the default.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Manchester.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Manchester job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Manchester briefs
- Warehouse conversions
Exposed brick, timber joists and steel look superb and hold nothing back. Neighbour noise between units is the first complaint, echo the second.
- Student and build to rent blocks
Repeat rooms mean a repeatable detail. Get the wall and floor build-up right once and it works across every level.
- Metrolink and city centre traffic
Ground level trams and buses put low frequency into the structure, which panels on the wall will not touch.
- Wet climate
PET felt does not take up moisture or feed mould, which suits older brick stock and cold external walls.
- Assembly and performance rooms
Church buildings, civic halls and converted industrial spaces are long-decay volumes with hard surfaces throughout.
If you are specifying for a Manchester project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
What the Manchester climate rules in and rules out
Manchester is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
How material reaches a Manchester site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Liverpool, Felixstowe or Southampton |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Liverpool |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we tell you before you order.
Sea freight into Liverpool, Felixstowe or Southampton. Air freight for samples and urgent quantities. Clearance through your agent or ours.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Manchester certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Manchester: questions we are actually asked
Is there a Manchester factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Manchester as the manufacturer rather than through a dealer. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Manchester project?
Exposed brick, timber joists and steel look superb and hold nothing back. Neighbour noise between units is the first complaint, echo the second. Repeat rooms mean a repeatable detail. Get the wall and floor build-up right once and it works across every level. Those two things move the build-up far more than the panel figure does.
How does the Manchester climate affect this product?
Manchester is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Manchester?
ships from: Palwal, Haryana, India, arrives at: Liverpool, Felixstowe or Southampton, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we tell you before you order.
What will wooden slat acoustic panels not do?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.