Manufactured in India, supplied in Maldives
Acoustic foam and BassBloc in Maldives
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Maldives. Made at our own plant in India and shipped into Malé, then transferred by boat to the island.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
What this material is and where it earns its place in Maldives
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Maldives is mostly resort villas and guest rooms, spas, restaurants and bars, staff accommodation, back of house.
Concrete and block construction with hard floors, on islands where buildings sit close together and plant is never far from a bedroom.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Maldives.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Maldives project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Maldives
- The last leg is by sea
Landing craft transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a truck dock.
- Salt air is relentless
PET felt does not absorb moisture, rot or corrode. On an atoll that is not a preference, it is the only sensible choice.
- Villas are lightly built
Timber and light structures over water with little mass. Isolation between villas is limited by the construction, and we say so rather than overselling.
- A short sea leg from India
Western India to Malé is quick, which makes modest and staged consignments practical for a resort refurbishment.
- The housing stock
Concrete and block construction with hard floors, on islands where buildings sit close together and plant is never far from a bedroom.
- The studio and content scene
Very limited local studio work, with most acoustic demand coming from resort entertainment spaces instead.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
What the Maldives climate rules in and rules out
Maldives is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
How material reaches a Maldives site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Malé, then boat transfer to the island |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Malé, then boat |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Malé, then boat transfer to the island. Air freight for samples and small urgent items.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Maldives
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Maldives: questions we are actually asked
Where are the acoustic foam and BassBloc you supply to Maldives actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Maldives as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Malé, then transferred by boat to the island. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Maldives project?
Landing craft transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a truck dock. PET felt does not absorb moisture, rot or corrode. On an atoll that is not a preference, it is the only sensible choice. Those two things move the build-up far more than the panel figure does.
Is this the right material for Maldives conditions?
Maldives is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Maldives?
ships from: Palwal, Haryana, India, arrives at: Malé, then boat transfer to the island, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic foam and BassBloc for?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.