Manufactured in India, supplied in Jeddah
Ceiling baffles and clouds in Jeddah
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Jeddah. Made at our own plant in India and shipped straight into Jeddah, so the container lands at the city rather than a long drive away.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this material is and where it earns its place in Jeddah
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Jeddah is mostly hotels and hospitality, corporate offices, apartments, hospitals, schools, retail.
Villas and apartment blocks are concrete and block with hard stone or tile throughout. Mass is there, but every room is live and impact noise between floors is untreated.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Jeddah.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification sheet
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Jeddah
- Coastal humidity
PET felt does not absorb moisture, shed fibre or feed mould, which matters on a humid Red Sea coast where mineral products sag.
- The port is at the city
Direct sea into Jeddah keeps the road leg short and the landed cost predictable, which is unusual in this region.
- A gateway for pilgrimage hospitality
Large hotel quantities often continue inland from here. Tell us if that is happening and we stage and pack for the second leg.
- Guest rooms fail at the door
Corridor noise and the next room cause more complaints than room acoustics. Door and wall detailing is where the work is.
- School and campus buildings
New school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
For a Jeddah practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
Durability in Jeddah, before acoustics is discussed
Jeddah is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
Getting it to Jeddah, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Jeddah, then a short road run or onward inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Jeddah |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Jeddah, then a short road run to site or onward inland. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Jeddah
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Jeddah: questions we are actually asked
Are these ceiling baffles and clouds made in Jeddah?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Jeddah as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Jeddah, so the container lands at the city rather than a long drive away. You buy at factory prices with one consistent batch across the order.
Why would a Jeddah build-up differ from anywhere else?
Direct sea into Jeddah keeps the road leg short and the landed cost predictable, which is unusual in this region. Large hotel quantities often continue inland from here. Tell us if that is happening and we stage and pack for the second leg. Those two things move the build-up far more than the panel figure does.
Is this the right material for Jeddah conditions?
Jeddah is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Jeddah?
ships from: Palwal, Haryana, India, arrives at: Jeddah, then a short road run or onward inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are ceiling baffles and clouds the wrong purchase?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.