Home > Jeddah > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Jeddah

Acoustic carpet and rugs in Jeddah

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Jeddah. Made at our own plant in India and shipped straight into Jeddah, so the container lands at the city rather than a long drive away.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.

01 / What it is

The material, and what it actually does on a Jeddah job

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Jeddah is mostly hotels and hospitality, corporate offices, apartments, hospitals, schools, retail.

Villas and apartment blocks are concrete and block with hard stone or tile throughout. Mass is there, but every room is live and impact noise between floors is untreated.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Jeddah.

Acoustic carpets and rugs

02 / Data sheet

The published figures, unchanged by location

We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.

03 / In this market

The Jeddah conditions that change the answer

  • A gateway for pilgrimage hospitality

    Large hotel quantities often continue inland from here. Tell us if that is happening and we stage and pack for the second leg.

  • Coastal humidity

    PET felt does not absorb moisture, shed fibre or feed mould, which matters on a humid Red Sea coast where mineral products sag.

  • The port is at the city

    Direct sea into Jeddah keeps the road leg short and the landed cost predictable, which is unusual in this region.

  • Guest rooms fail at the door

    Corridor noise and the next room cause more complaints than room acoustics. Door and wall detailing is where the work is.

  • Assembly and performance rooms

    Mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.

  • The housing stock

    Villas and apartment blocks are concrete and block with hard stone or tile throughout. Mass is there, but every room is live and impact noise between floors is untreated.

Architects working in Jeddah usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.

04 / Climate

Durability in Jeddah, before acoustics is discussed

Jeddah is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.

Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.

The risk we design against here is dust ingress and thermal movement in long runs.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Supply

Getting it to Jeddah, with real dates

Supply into Jeddah
Ships fromPalwal, Haryana, India
Arrives atJeddah, then a short road run or onward inland
Dispatch4 to 7 working days
FreightSea into Jeddah
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Sea freight direct into Jeddah, then a short road run to site or onward inland. Air freight for samples and urgent quantities.

The same minimums apply on export.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Straight talk

Four honest warnings before you buy

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Square footage quoted before the room is understood

    Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.

  • A claim of being local to Jeddah

    We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.

FAQ

Jeddah: questions we are actually asked

Are these acoustic carpet and rugs made in Jeddah?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Jeddah as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Jeddah, so the container lands at the city rather than a long drive away. You buy at factory prices with one consistent batch across the order.

What decides the specification for a Jeddah project?

Direct sea into Jeddah keeps the road leg short and the landed cost predictable, which is unusual in this region. Large hotel quantities often continue inland from here. Tell us if that is happening and we stage and pack for the second leg. Those two things move the build-up far more than the panel figure does.

Will this material last in the Jeddah climate?

Jeddah is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.

When would material land on a Jeddah site?

ships from: Palwal, Haryana, India, arrives at: Jeddah, then a short road run or onward inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

What should you not buy acoustic carpet and rugs for?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Is there a minimum order, and how does it arrive?

The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Send a plan and a section, get a real build-up

We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.