Manufactured in India, supplied in Italy
Wood wool acoustic panels in Italy
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Italy. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
What this is, and what it changes in a Italy room
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Italy is mostly apartments, hotels, restaurants, showrooms, offices, studios, clinics, schools.
Masonry palazzi and later concrete blocks, with terrazzo and tile floors and shared courtyards that carry sound between flats.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Italy.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Italy job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Italy
- Hard shells, long reverberation
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Heritage limits what you can touch
In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Condominio living
Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Appearance is half the brief
Italian clients look at the panel before they listen to it. We supply consistent colour across a full order and finishes that survive a design review.
- Assembly and performance rooms
Churches, theatres and civic halls are stone and plaster volumes with decay times measured in seconds.
- School and campus buildings
School buildings are hard surfaced with high ceilings, and many sit inside older structures where intervention has to be reversible.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Durability in Italy, before acoustics is discussed
Italy is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
Getting it to Italy, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Genoa, La Spezia or Trieste, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Genoa |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Genoa, La Spezia or Trieste, then road to site anywhere in the country. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Italy
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Italy: questions we are actually asked
Where are the wood wool acoustic panels you supply to Italy actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Italy as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Italy enquiry?
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling. In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems. Those two things move the build-up far more than the panel figure does.
How does the Italy climate affect this product?
Italy is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
When would material land on a Italy site?
ships from: Palwal, Haryana, India, arrives at: Genoa, La Spezia or Trieste, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do wood wool acoustic panels fail to help?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.