Manufactured in India, supplied in Italy
PET felt acoustic panels in Italy
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Italy. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
The product, described honestly, for a Italy brief
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Italy is mostly apartments, hotels, restaurants, showrooms, offices, studios, clinics, schools.
Masonry palazzi and later concrete blocks, with terrazzo and tile floors and shared courtyards that carry sound between flats.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Italy.
02 / Specification sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Italy project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Italy
- Hard shells, long reverberation
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Heritage limits what you can touch
In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Condominio living
Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Appearance is half the brief
Italian clients look at the panel before they listen to it. We supply consistent colour across a full order and finishes that survive a design review.
- School and campus buildings
School buildings are hard surfaced with high ceilings, and many sit inside older structures where intervention has to be reversible.
If you are specifying for a Italy project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Italy climate rules in and rules out
Italy is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into Italy, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Genoa, La Spezia or Trieste, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Genoa |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Genoa, La Spezia or Trieste, then road to site anywhere in the country. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Italy presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Italy: questions we are actually asked
Is there a Italy factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Italy as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Italy enquiry?
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling. In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems. Those two things move the build-up far more than the panel figure does.
Is this the right material for Italy conditions?
Italy is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
When would material land on a Italy site?
ships from: Palwal, Haryana, India, arrives at: Genoa, La Spezia or Trieste, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do PET felt acoustic panels fail to help?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.