For projects in Italy
Office acoustics and soundproofing in Italy
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Split and multi-split systems with condensers in courtyards that reflect noise back into every flat.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Italy brief
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Split and multi-split systems with condensers in courtyards that reflect noise back into every flat.
Work reaching us from Italy is mostly apartments, hotels, restaurants, showrooms, offices, studios, clinics, schools.
- Hard shells, long reverberation Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Heritage limits what you can touch In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Condominio living Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Italy.
Office and conference room acoustics Acoustic office screens
02 / The build-up
What goes where, from the structure in
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Italy, split and multi-split systems with condensers in courtyards that reflect noise back into every flat.
Direct to wall. Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Italy, churches, theatres and civic halls are stone and plaster volumes with decay times measured in seconds.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Italy, school buildings are hard surfaced with high ceilings, and many sit inside older structures where intervention has to be reversible.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
Architects working in Italy usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / On the ground
The Italy conditions that change the answer
- Hard shells, long reverberation
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Heritage limits what you can touch
In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Condominio living
Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Appearance is half the brief
Italian clients look at the panel before they listen to it. We supply consistent colour across a full order and finishes that survive a design review.
- Plant and HVAC
Split and multi-split systems with condensers in courtyards that reflect noise back into every flat.
04 / Room by room
Space by space, for Italy briefs
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic carpet and rugs, 4 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic carpet and rugs, High density polyester
- Acoustic panels, ASTM C423
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic carpet and rugs, Felt
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
For a Italy interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Durability
Why the climate in Italy changes the material, not the target
Italy is hot dry summers and mild wet winters, and that narrows the material list before acoustics is discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Read this first
Six mistakes that turn into a second fit-out
-
Lining every wall while leaving the ceiling bare
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating a privacy problem with absorption
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Glass cabins specified without a door and head detail
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Italy job
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
05 / Logistics
Getting it to Italy, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Genoa, La Spezia or Trieste, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Genoa |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Genoa, La Spezia or Trieste, then road to site anywhere in the country. Air freight for samples and urgent quantities.
Questions from Italy projects
What makes office acoustics and soundproofing different in Italy?
Split and multi-split systems with condensers in courtyards that reflect noise back into every flat. Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
Where should the budget go first on a Italy project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Italy?
No. We manufacture in India and supply into Italy. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Italy site?
ships from: Palwal, Haryana, India, arrives at: Genoa, La Spezia or Trieste, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.