For projects in Egypt
Hospital and healthcare acoustics in Egypt
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Split units and generator sets, with condensers in light wells that channel noise back into every flat.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
What you are buying, and what it fixes in Egypt
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Split units and generator sets, with condensers in light wells that channel noise back into every flat.
Work reaching us from Egypt is mostly new development and government buildings, hotels and resorts, offices, hospitals, schools, venues.
- Convenient sailings Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
- Development at scale Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet.
- Heat, dust and sealed buildings Closed up with heavy cooling, so plant noise accumulates inside and rooms stay hard and live.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Egypt.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Egypt, split units and generator sets, with condensers in light wells that channel noise back into every flat.
On a 25 to 50 mm air gap. The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Egypt, mosques, churches and cinema halls are large hard volumes carrying amplified speech and music.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Egypt, classrooms are concrete and tile with very large class sizes and street noise through open windows.
Mixed finish. Plain felt where it is out of eye line, printed or grooved where it is seen.
If you are specifying for a Egypt project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / Local conditions
What decides the build-up in Egypt
- Convenient sailings
Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
- Development at scale
Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet.
- Heat, dust and sealed buildings
Closed up with heavy cooling, so plant noise accumulates inside and rooms stay hard and live.
- Assembly and function spaces
Large halls in concrete and stone where speech stops being intelligible well before the room sounds wrong.
- Plant and HVAC
Split units and generator sets, with condensers in light wells that channel noise back into every flat.
04 / Room by room
Space by space, for Egypt briefs
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Acoustic carpet and rugs, 4 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Closed up with heavy cooling, so plant noise accumulates inside and rooms stay hard and live.
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Durability
The Egypt climate decides the material list
Egypt is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Worth knowing
What we watch go wrong on jobs like this
-
Fabric wrapped products in a clinical area
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Absorption used where privacy was the requirement
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Ceiling void left open above a partition
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating it as a generic Egypt job
Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
05 / Logistics
How material reaches a Egypt site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Alexandria, Port Said or Sokhna, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Alexandria or Port Said |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Alexandria, Port Said or Sokhna, then road to site. Air freight for samples and urgent quantities.
Questions from Egypt projects
What makes hospital and healthcare acoustics different in Egypt?
Split units and generator sets, with condensers in light wells that channel noise back into every flat. Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
Where should the budget go first on a Egypt project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Egypt?
No. We manufacture in India and supply into Egypt. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Egypt site?
ships from: Palwal, Haryana, India, arrives at: Alexandria, Port Said or Sokhna, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.