Manufactured in India, supplied in Egypt
SoundBlanket mass loaded vinyl in Egypt
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Egypt. Made at our own plant in India and shipped into Alexandria, Port Said or Sokhna.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Egypt brief
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Egypt is mostly new development and government buildings, hotels and resorts, offices, hospitals, schools, venues.
Reinforced concrete frames with block infill and hard tile floors, in blocks that sit close together with narrow light wells between them.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Egypt.
02 / Specification
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What we see driving Egypt briefs
- Convenient sailings
Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
- Development at scale
Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet.
- Heat, dust and sealed buildings
Closed up with heavy cooling, so plant noise accumulates inside and rooms stay hard and live.
- Assembly and function spaces
Large halls in concrete and stone where speech stops being intelligible well before the room sounds wrong.
- The housing stock
Reinforced concrete frames with block infill and hard tile floors, in blocks that sit close together with narrow light wells between them.
- The studio and content scene
A large and long established film and music industry working in rooms that were never built for it.
Architects working in Egypt usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
The Egypt climate decides the material list
Egypt is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Egypt interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Route to site
How material reaches a Egypt site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Alexandria, Port Said or Sokhna, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Alexandria or Port Said |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Alexandria, Port Said or Sokhna, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export as on domestic orders.
| 2.5 mm and 4 mm | 10 rolls, 60 sq m |
|---|---|
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Egypt presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Egypt: questions we are actually asked
Are these soundBlanket mass loaded vinyl made in Egypt?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Egypt as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Alexandria, Port Said or Sokhna. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Egypt project?
Our routes to Europe already pass this way, which keeps frequency good and freight competitive. Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet. Those two things move the build-up far more than the panel figure does.
Will this material last in the Egypt climate?
Egypt is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Egypt?
ships from: Palwal, Haryana, India, arrives at: Alexandria, Port Said or Sokhna, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do soundBlanket mass loaded vinyl fail to help?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
What is the minimum order and how is it packed?
The same minimums apply on export as on domestic orders. 2.5 mm and 4 mm, 10 rolls, 60 sq m. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.