Manufactured in India, supplied in Dublin
Acoustic foam and BassBloc in Dublin
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Dublin. Made at our own plant in India and shipped straight into Dublin Port, which sits inside the city, so the road leg to most sites is measured in minutes.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this material is and where it earns its place in Dublin
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Dublin is mostly build-to-rent apartments, Georgian conversions, docklands offices, pubs and venues, clinics.
Terraced and semi-detached housing with block party walls and timber upper floors. Apartment stock is concrete with hard finishes throughout.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Dublin.
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / Local conditions
What we see driving Dublin briefs
- The port is in the city
Containers land at Dublin Port and are on site the same day. That is the practical reason a factory in India can compete here on landed cost and on timing.
- Build-to-rent party walls
Thousands of units built to the same separating detail. When that detail underperforms, it underperforms in every flat, so it is worth getting right on the drawing.
- Georgian conversions
High ceilings, lath and plaster, timber floors and protected fabric. Everything has to be done internally and shallow, and often reversibly.
- Late trading under homes
Pubs and venues now sit beneath apartments that were not there ten years ago. The low end and the footfall are what generate the complaints.
- The housing stock
Terraced and semi-detached housing with block party walls and timber upper floors. Apartment stock is concrete with hard finishes throughout.
- The studio and content scene
Project studios go into converted rooms and garages in terraced stock, where the party wall sets the limit.
If you are specifying for a Dublin project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Dublin climate rules in and rules out
Dublin is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
Getting it to Dublin, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dublin Port, minutes from most city sites |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Dublin Port |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Dublin Port, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Dublin certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The material in real interiors
Dublin: questions we are actually asked
Are these acoustic foam and BassBloc made in Dublin?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Dublin as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Dublin Port, which sits inside the city, so the road leg to most sites is measured in minutes. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Dublin enquiry?
Containers land at Dublin Port and are on site the same day. That is the practical reason a factory in India can compete here on landed cost and on timing. Thousands of units built to the same separating detail. When that detail underperforms, it underperforms in every flat, so it is worth getting right on the drawing. Those two things move the build-up far more than the panel figure does.
How does the Dublin climate affect this product?
Dublin is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Dublin?
ships from: Palwal, Haryana, India, arrives at: Dublin Port, minutes from most city sites, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic foam and BassBloc the wrong purchase?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.