Manufactured in India, supplied in Dhaka
Acoustic carpet and rugs in Dhaka
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Dhaka. Made at our own plant in India and moved by sea into Chattogram or overland through the land border, then road into the city.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The product, described honestly, for a Dhaka brief
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Dhaka is mostly apartments, offices, garment unit admin blocks, hospitals, schools, hotels, studios.
Reinforced concrete frames with brick infill and hard floors. Apartment blocks sit close together with shared walls and open light wells between them.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Dhaka.
02 / Specification sheet
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
On a Dhaka job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What we see driving Dhaka briefs
- Noise arrives from outside
Traffic, generators and construction reach the room through windows and gaps long before they come through the wall. Treat the weakest path, not the biggest surface.
- Generators in every gap
Standby generation sits in courtyards and alleys next to bedrooms and offices. Enclosure at the source is the only thing that works.
- Buildings against buildings
There is often no gap at all between structures, so sound moves between buildings as well as within them.
- A short route from the plant
Sea into Chattogram or overland through the border, which keeps lead times short and consignments flexible.
- Assembly and performance rooms
Community halls, places of worship and conference rooms are hard volumes carrying amplified speech.
- The housing stock
Reinforced concrete frames with brick infill and hard floors. Apartment blocks sit close together with shared walls and open light wells between them.
For a Dhaka practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
Why the climate in Dhaka changes the material, not the target
Dhaka is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
How material reaches a Dhaka site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Chattogram or the land border, then road into Dhaka |
| Dispatch | 4 to 7 working days |
| Freight | Sea or land border |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Chattogram or overland through the land border, then road into Dhaka. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Dhaka certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Dhaka: questions we are actually asked
Are these acoustic carpet and rugs made in Dhaka?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Dhaka as the manufacturer rather than through a dealer. Made at our own plant in India and moved by sea into Chattogram or overland through the land border, then road into the city. You buy at factory prices with one consistent batch across the order.
Why would a Dhaka build-up differ from anywhere else?
Traffic, generators and construction reach the room through windows and gaps long before they come through the wall. Treat the weakest path, not the biggest surface. Standby generation sits in courtyards and alleys next to bedrooms and offices. Enclosure at the source is the only thing that works. Those two things move the build-up far more than the panel figure does.
How does the Dhaka climate affect this product?
Dhaka is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Dhaka?
ships from: Palwal, Haryana, India, arrives at: Chattogram or the land border, then road into Dhaka, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic carpet and rugs the wrong purchase?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
How is the order packed and what is the minimum?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.