Manufactured in India, supplied in Denmark
Acoustic panels in Denmark
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Denmark. Made at our own plant in India and shipped into Aarhus or Copenhagen, then a short road run to almost anywhere in the country.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this material is and where it earns its place in Denmark
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Denmark is mostly apartments, offices, schools, healthcare, timber buildings, studios.
Masonry blocks with timber joist floors in older stock and concrete in newer, with hard surfaces and cold external walls throughout.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Denmark.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Data sheet
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Denmark briefs
- Classes are written and verified
Work here arrives with a target and gets checked afterwards. Send us the class and we will say plainly what our material reaches and where it does not.
- Design led interiors
Finish matters as much as performance. Colour consistency across a full order is part of the job, not an afterthought.
- Timber and lightweight construction
Light structures pass low frequency easily, so mass and decoupling do the work rather than more absorption.
- Sealed through a long winter
Buildings close up with ventilation running constantly, so plant noise matters more than street noise.
- School and campus buildings
Classroom acoustics are taken seriously, and open plan learning spaces make speech intelligibility the design target rather than echo.
- The studio and content scene
A strong design and production culture where measured targets are expected rather than adjectives.
If you are specifying for a Denmark project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
Durability in Denmark, before acoustics is discussed
Denmark is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Getting it to Denmark, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Aarhus or Copenhagen, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Aarhus |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Aarhus or Copenhagen, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Denmark presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
How it looks once it is installed
Denmark: questions we are actually asked
Is there a Denmark factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Denmark as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Aarhus or Copenhagen, then a short road run to almost anywhere in the country. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Denmark project?
Work here arrives with a target and gets checked afterwards. Send us the class and we will say plainly what our material reaches and where it does not. Finish matters as much as performance. Colour consistency across a full order is part of the job, not an afterthought. Those two things move the build-up far more than the panel figure does.
Will this material last in the Denmark climate?
Denmark is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Denmark site?
ships from: Palwal, Haryana, India, arrives at: Aarhus or Copenhagen, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.