Manufactured in India, supplied in Denmark
Acoustic foam and BassBloc in Denmark
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Denmark. Made at our own plant in India and shipped into Aarhus or Copenhagen, then a short road run to almost anywhere in the country.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this is, and what it changes in a Denmark room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Denmark is mostly apartments, offices, schools, healthcare, timber buildings, studios.
Masonry blocks with timber joist floors in older stock and concrete in newer, with hard surfaces and cold external walls throughout.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Denmark.
02 / Specification
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Denmark
- Classes are written and verified
Work here arrives with a target and gets checked afterwards. Send us the class and we will say plainly what our material reaches and where it does not.
- Design led interiors
Finish matters as much as performance. Colour consistency across a full order is part of the job, not an afterthought.
- Timber and lightweight construction
Light structures pass low frequency easily, so mass and decoupling do the work rather than more absorption.
- Sealed through a long winter
Buildings close up with ventilation running constantly, so plant noise matters more than street noise.
- The housing stock
Masonry blocks with timber joist floors in older stock and concrete in newer, with hard surfaces and cold external walls throughout.
- The studio and content scene
A strong design and production culture where measured targets are expected rather than adjectives.
For a Denmark practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
Durability in Denmark, before acoustics is discussed
Denmark is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Denmark, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Aarhus or Copenhagen, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Aarhus |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Aarhus or Copenhagen, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Denmark certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Denmark: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Denmark?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Denmark as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Aarhus or Copenhagen, then a short road run to almost anywhere in the country. You buy at factory prices with one consistent batch across the order.
Why would a Denmark build-up differ from anywhere else?
Work here arrives with a target and gets checked afterwards. Send us the class and we will say plainly what our material reaches and where it does not. Finish matters as much as performance. Colour consistency across a full order is part of the job, not an afterthought. Those two things move the build-up far more than the panel figure does.
Will this material last in the Denmark climate?
Denmark is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Denmark?
ships from: Palwal, Haryana, India, arrives at: Aarhus or Copenhagen, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.