Manufactured in India, supplied in Chicago
Acoustic carpet and rugs in Chicago
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Chicago. Made at our own plant in India, shipped into an East or Gulf coast port and railed inland, with that leg quoted separately so the dates are real.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What you are buying, and what it fixes in Chicago
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Chicago is mostly two-flats and three-flats, high-rise apartments, offices, venues, schools, clinics.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Chicago.
02 / Data sheet
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Where a consultant is already engaged on a Chicago project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What the buildings in Chicago do to the specification
- Elevated rail past the window
Trains at window height put noise in through the glazing, not through the wall. The facade is where the money should go first.
- Brick outside, timber inside
Two-flats and three-flats have solid masonry outside and timber floors between families. Footfall travels down and masonry does nothing about it.
- Sealed against hard winters
Buildings close up for months and mechanical systems run hard, so sound accumulates inside rather than escaping.
- No port, so plan the inland leg
Everything arrives at a coast and rails in. We quote the sea leg and the inland leg separately.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
What the Chicago climate rules in and rules out
Chicago is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
How material reaches a Chicago site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | An East or Gulf coast port, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea, then rail inland |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into an East or Gulf coast port, then rail and road to Chicago. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Chicago presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Chicago: questions we are actually asked
Are these acoustic carpet and rugs made in Chicago?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Chicago as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into an East or Gulf coast port and railed inland, with that leg quoted separately so the dates are real. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Chicago project?
Trains at window height put noise in through the glazing, not through the wall. The facade is where the money should go first. Two-flats and three-flats have solid masonry outside and timber floors between families. Footfall travels down and masonry does nothing about it. Those two things move the build-up far more than the panel figure does.
Is this the right material for Chicago conditions?
Chicago is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
What is the delivery time into Chicago?
ships from: Palwal, Haryana, India, arrives at: An East or Gulf coast port, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.