Manufactured in India, supplied in Calgary
Wooden slat acoustic panels in Calgary
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Calgary. Made at our own plant in India, shipped into Vancouver and railed inland.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Calgary room
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Calgary is mostly corporate offices and operations centres, condo towers, schools, clinics, home theatres.
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Calgary.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Where a consultant is already engaged on a Calgary project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / Local conditions
What we see driving Calgary briefs
- A long way inland
Vancouver then rail across the mountains. It is a real leg with real time attached, and we build it into the date rather than quoting a port arrival.
- Operations centres run all day
Rooms where people monitor, take calls and talk over each other for twelve hours need intelligibility and privacy together, not just less echo.
- Sealed against deep cold
Buildings close up for months and mechanical systems work hard. Sound stops leaking out and starts building up, so absorption has to be balanced rather than maximised.
- Light frame residential
Condo and house construction is gypsum on studs, which passes low frequency far more easily than concrete. Added mass and decoupling do the work.
- Assembly and performance rooms
Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
If you are specifying for a Calgary project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
The Calgary climate decides the material list
Calgary is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
What the route into Calgary actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Vancouver, then rail and road to Calgary |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Vancouver, then rail |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Add the sea leg to Vancouver and the rail leg inland, and plan the full window. We quote both parts separately.
Sea freight into Vancouver, then rail and road to Calgary. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Calgary
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Calgary: questions we are actually asked
Is there a Calgary factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Calgary as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Vancouver and railed inland. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Calgary enquiry?
Vancouver then rail across the mountains. It is a real leg with real time attached, and we build it into the date rather than quoting a port arrival. Rooms where people monitor, take calls and talk over each other for twelve hours need intelligibility and privacy together, not just less echo. Those two things move the build-up far more than the panel figure does.
How does the Calgary climate affect this product?
Calgary is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Calgary?
ships from: Palwal, Haryana, India, arrives at: Vancouver, then rail and road to Calgary, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Add the sea leg to Vancouver and the rail leg inland, and plan the full window. We quote both parts separately.
When are wooden slat acoustic panels the wrong purchase?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.