Manufactured in India, supplied in Calgary
Ceiling baffles and clouds in Calgary
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Calgary. Made at our own plant in India, shipped into Vancouver and railed inland.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Calgary room
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Calgary is mostly corporate offices and operations centres, condo towers, schools, clinics, home theatres.
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Calgary.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / The numbers
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Calgary briefs
- A long way inland
Vancouver then rail across the mountains. It is a real leg with real time attached, and we build it into the date rather than quoting a port arrival.
- Operations centres run all day
Rooms where people monitor, take calls and talk over each other for twelve hours need intelligibility and privacy together, not just less echo.
- Sealed against deep cold
Buildings close up for months and mechanical systems work hard. Sound stops leaking out and starts building up, so absorption has to be balanced rather than maximised.
- Light frame residential
Condo and house construction is gypsum on studs, which passes low frequency far more easily than concrete. Added mass and decoupling do the work.
- School and campus buildings
School buildings run hard floors and lay-in tile with long heating seasons and sealed envelopes, so rooms stay live and mechanical noise is always present.
If you are specifying for a Calgary project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Why the climate in Calgary changes the material, not the target
Calgary is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Supply into Calgary, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Vancouver, then rail and road to Calgary |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Vancouver, then rail |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Add the sea leg to Vancouver and the rail leg inland, and plan the full window. We quote both parts separately.
Sea freight into Vancouver, then rail and road to Calgary. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Calgary
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Calgary: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Calgary?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Calgary as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Vancouver and railed inland. You buy at factory prices with one consistent batch across the order.
Why would a Calgary build-up differ from anywhere else?
Vancouver then rail across the mountains. It is a real leg with real time attached, and we build it into the date rather than quoting a port arrival. Rooms where people monitor, take calls and talk over each other for twelve hours need intelligibility and privacy together, not just less echo. Those two things move the build-up far more than the panel figure does.
Does Calgary weather shorten the life of this material?
Calgary is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Calgary?
ships from: Palwal, Haryana, India, arrives at: Vancouver, then rail and road to Calgary, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Add the sea leg to Vancouver and the rail leg inland, and plan the full window. We quote both parts separately.
Where do ceiling baffles and clouds fail to help?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.