Manufactured in India, supplied in Brisbane
Acoustic carpet and rugs in Brisbane
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Brisbane. Made at our own plant in India and shipped into the Port of Brisbane.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a Brisbane job
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Brisbane is mostly timber housing and renovations, apartments, offices, venues, schools, clinics.
Timber frame in detached housing, concrete in apartments. Apartment party walls and slabs are the source of most complaints, and impact noise needs a resilient layer.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Brisbane.
02 / Data sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
On a Brisbane job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What decides the build-up in Brisbane
- Subtropical humidity
PET felt does not absorb moisture, shed fibre or feed mould, which matters through a humid summer where mineral products sag.
- Houses raised on stumps
A timber floor over open air has almost no mass and nothing below it. Adding mass and closing the underfloor does more than anything applied inside the room.
- Apartments built light and fast
The same separating detail repeated across a development. Worth solving on the drawing rather than after settlement.
- A long sea leg
One of the longer routes we run. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- Assembly and performance rooms
School halls, community centres and church buildings carry assembly, performance and sport in one hard volume.
- The housing stock
Timber frame in detached housing, concrete in apartments. Apartment party walls and slabs are the source of most complaints, and impact noise needs a resilient layer.
Architects working in Brisbane usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
What the Brisbane climate rules in and rules out
Brisbane is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
What the route into Brisbane actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Brisbane, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port of Brisbane |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into the Port of Brisbane, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Brisbane
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Brisbane: questions we are actually asked
Where are the acoustic carpet and rugs you supply to Brisbane actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Brisbane as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into the Port of Brisbane. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Brisbane project?
A timber floor over open air has almost no mass and nothing below it. Adding mass and closing the underfloor does more than anything applied inside the room. PET felt does not absorb moisture, shed fibre or feed mould, which matters through a humid summer where mineral products sag. Those two things move the build-up far more than the panel figure does.
Does Brisbane weather shorten the life of this material?
Brisbane is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Brisbane site?
ships from: Palwal, Haryana, India, arrives at: Port of Brisbane, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are acoustic carpet and rugs the wrong purchase?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.