Manufactured in India, supplied in Brisbane
PET felt acoustic panels in Brisbane
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Brisbane. Made at our own plant in India and shipped into the Port of Brisbane.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The product
What this material is and where it earns its place in Brisbane
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Brisbane is mostly timber housing and renovations, apartments, offices, venues, schools, clinics.
Timber frame in detached housing, concrete in apartments. Apartment party walls and slabs are the source of most complaints, and impact noise needs a resilient layer.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Brisbane.
02 / The numbers
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
On a Brisbane job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What the buildings in Brisbane do to the specification
- Subtropical humidity
PET felt does not absorb moisture, shed fibre or feed mould, which matters through a humid summer where mineral products sag.
- Houses raised on stumps
A timber floor over open air has almost no mass and nothing below it. Adding mass and closing the underfloor does more than anything applied inside the room.
- Apartments built light and fast
The same separating detail repeated across a development. Worth solving on the drawing rather than after settlement.
- A long sea leg
One of the longer routes we run. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- School and campus buildings
School buildings run hard floors and high ceilings, and open plan learning areas make speech intelligibility the central problem rather than echo.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
Why the climate in Brisbane changes the material, not the target
Brisbane is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
What the route into Brisbane actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Brisbane, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port of Brisbane |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into the Port of Brisbane, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Brisbane presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Brisbane: questions we are actually asked
Is there a Brisbane factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Brisbane as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into the Port of Brisbane. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Brisbane project?
A timber floor over open air has almost no mass and nothing below it. Adding mass and closing the underfloor does more than anything applied inside the room. PET felt does not absorb moisture, shed fibre or feed mould, which matters through a humid summer where mineral products sag. Those two things move the build-up far more than the panel figure does.
How does the Brisbane climate affect this product?
Brisbane is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Brisbane?
ships from: Palwal, Haryana, India, arrives at: Port of Brisbane, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will PET felt acoustic panels not do?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.